전체카테고리
  • PE110
  • 1
  • 3
  • 4
  • 5
  • 6
  • PE110
  • 1
  • 3
  • 4
  • 5
  • 6

물 배수장치/전자 지역을 위한 Jwell 에너지 절약 20mm - 110mm PE 관 밀어남 기계

원산지 장소 :

중국

브랜드 이름 :

제이웰

모델 번호 :

JWS60 / 38

인증:

CE & ISO


연락해 주십시오
제품 작동 비디오

제품소개

HDPE 20mm - 110mm PE Pipe Extruder is mainly applied in Water and gas Supply Pipe. This production line can produce in the HDPE pipe with diameter of 20mm/25mm/32mm/40mm/50mm/63mm/75mm/90mm/110mm, and also can be suitable for producing different pressure degree pipes ranged from SDR9-SDR26. This production line is consist of JWS75/38 single screw extruder, die-head, calibration tank, water tank, cooling tank, haul-off unit, cutter and stacker. In order to produce larger capacity, higher efficiency pipes, we also suggest our customers to equip the Gravimetric systems. After all these years development, we have made some modification for the main extruder, die head, calibration tank and cutter to create a better customer satisfaction.

PE110


압출기 :
HDPE Diameter of 20mm - 110mm PE Pipe Extruder. Equipped with JWS75/33 or JWS 75/38 extruder with Siemens PLC control system and energy saving heating system. The motor can be ranged from 75kw-160kw (75kw, 90kw,110kw, 132kw, 160kw). The capacity is also ranged from 200-650kg per hour. We also provide two different gearbox for customers to make option. One is made in China best quality brand Guomao; another is Flender, made in Germany.

Mold/Dies:
Jwell make the pipe molds by herself. For HDPE pipes, with special material mold 40Cr. Beside, we can also provide a complete spare parts service for mold including die pin, die bush, and calibration die. We also provide high quality and high speed calibration dies to meet different customer’s requirement.


Calibration tank:
Jwell designs high performance and energy calibration tank for customers. This calibration tank is 9 meter to make sure the pipes can be enough cooling and calibration. It can also be equipped with Frequency invertor to make energy saving, and low noise while the pump’s running. For Large diameter pipes extrusion line (630 and up), the calibration tank will be designed as two parts to make sure it has a better calibration effect.


Cooling tank:
The water mouth is specially designed inside the water tank. And the water can be spray on the pipes with 360 degree direction. The water mouth can also be adjustable to meet customer’s requirement. For high speed pipe extrusion line, we usually equipped 3 sets of water tanks.
喷淋箱

Haul-off unit:
For 20mm - 110mm PE Pipe Extruder, Jwell design two caterpillar haul-off unit. Under the control of frequency invertor or servo motor control system, this haul-off unit can be synchronized with the main extruder to make sure this whole production line working smoothly.

牵引机
커터:
Jwell design no-dust cutting system for this machine. Equipped with frequency invertor or servo motor system, the cutter can cut the pipes precisely. The cutting edge is also very smooth.
切割机

Stacker & Winder:
This Equipment is equipped pneumatic control system. For the small pipes under110mm (20 ~ 110mm) diameter. We usually suggest our customer to equip the winder instead of stacker.


Followings are some relevant part for the pipe machine:

        


애플리케이션

HDPE 파이프는 최소한의 유지보수로 100년 이상 지속될 수 있는 견고하고 탄력적인 소재로서 식수를 운반하고 분배하는 수단으로서 다른 많은 배관 소재보다 우수한 것으로 입증되었습니다. HDPE 파이프의 긴 사용 수명과 낮은 유지 관리 비용은 다양한 비개착 기술과 함께 설치될 수 있는 능력과 결합하여 식수 ​​배관 시스템의 수명 주기 비용이 가장 낮은 HDPE 파이프로 이어집니다. HDPE 파이프는 공공 및 개인 음용수 시스템에 이상적인 배관 솔루션입니다. HDPE 파이프는 100년 이상의 서비스 수명을 특징으로 하며 다양한 조건에서 수행할 수 있는 다재다능함을 가지고 있습니다. HDPE 파이프는 지자체 및 민간 음용수 응용 분야에서 논리적이고 유지 보수가 적은 투자를 제공합니다. HDPE 수도관이 다음 프로젝트에 어떻게 도움이 될 수 있는지 고객 서비스 담당자에게 문의하려면 지금 문의하십시오.

       


제품 사양


QQ 图片 20210324131850

경쟁 우위

성능 및 이점:
이 생산 라인은 유럽의 가장 앞선 기술을 채택합니다. HDPE, PP 및 기타 폴리올레핀 파이프의 고속 압출에 적합한 에너지 절약형 생산 라인의 새로운 연구 성과입니다. 일반 생산 라인과 비교하여 에너지 절감 효과가 35%에 달하고 제품 효율이 1배 이상 증가하여 현장 비용과 노동력을 절약할 뿐만 아니라 효율성을 향상시킵니다.
이 생산 라인에는 좋은 외관, 더 높은 automagical 정도, 믿을 수 있고 안정되어 있는 생산이 있습니다.


8
9
10
포장 및 배송

모든 Jwell 기계는 목재 팔레트로 포장됩니다. 일부 중요한 예비 부품의 경우 나무 상자로 포장합니다. 기계와 예비 부품이 중국 고객에게 안전하게 도착할 수 있도록. 용기를 선적하기 전에 고객님께 보험 가입을 부탁드립니다.

包装 图 1
包装 图 2
包装 图 3
包装 图 4
包装 图 5
包装 图 6
FAQ

Q1: 생산 능력은 무엇입니까
A1 : 우리는 매년 전세계 2000 개 이상의 고급 압출 라인을 생산합니다.

Q2: 배송은 어떻습니까?
A2: 우리는 긴급한 문제에 대해 항공 특급으로 작은 예비 부품을 보낼 수 있습니다. 그리고 바다로 완전한 생산 라인을 구축하여 비용을 절감하십시오. 당신은 당신의 할당된 배송 에이전트 또는 협력 포워더를 사용할 수 있습니다. 가장 가까운 항구는 해상 운송에 편리한 중국 상하이, 닝보 항구입니다.

Q3 : 사전 판매 서비스가 있습니까?
A3: 예, 사전 판매 서비스를 통해 비즈니스 파트너를 지원합니다. Jwell은 전 세계를 여행하는 300명 이상의 기술 테스트 엔지니어를 보유하고 있습니다. 모든 경우는 신속한 솔루션으로 응답됩니다. 우리는 평생 동안 교육, 테스트, 운영 및 유지 보수 서비스를 제공합니다.

Q4: Jwell Machinery를 사용하면 비즈니스 및 돈이 안전합니까?
A4: 예, 귀하의 사업은 안전하고 귀하의 자금은 안전합니다. 중국 회사 블랙리스트를 확인하면 이전에 고객을 속인 적이 없기 때문에 이름이 포함되어 있지 않은 것을 볼 수 있습니다. JWELL은 고객으로부터 높은 평판을 얻고 있으며 비즈니스와 고객은 해마다 성장하고 있습니다.


INQUIRY